$899.00 NZD
GST included in the price

Multistage Pumps efficiently achieve high pressure & flow at lower power usage with very quiet running.

This pump is suitable where there are Low Pressure Cylinders/Tapware  or Small-Medium Size Homes: 1-2 bathrooms.

Pump & Purify Multistage pumps have been constructed to a proven design, using high quality metal components, and exacting manufacturing standards.

Use Multistage Pumps in pressure systems delivering household water, irrigation, washing facilities, feeding troughs and many other applications.

We recommend that the pump and controller are plugged into a Belkin (or similar) Surge Protection device. RCD's in the power board may not provide sufficient protection from brown-outs, black-outs and power surges.

We also recommend that a pre-filter is installed inline prior to the pump suction to avoid debris being sucked into the impellers and causing damage.

Technical Information

Performance

This pump is suited for low pressure homes, where the pump will be situated close to the house, and or on a flat section.

  • Max Discharge 38m Head
  • Max Pressure 54 PSI (Equivalent to Mains)
  • Max Flow +116LPM
  • Max Suction Lift 6m (with Non Return Valve installed - not self priming)

Operation Parameters

  • 0.75kW Single Phase Motor
  • Liquid Temperature: 0-70 °C
  • Maximum Operating Pressure: 10 Bar
  • Enclosure Class:  IP55
  • Insulation Class:  F
  • Duty Rating:  Continuous Duty
  • Inlet:  1.25"
  • Outlet: 1"

See the performance curves for more detail on pressure and flow.  This model is shown as the 3rd line from bottom - 40.

Download a Technical Data Sheet here 

Construction Materials

  • Mechanical seal: Machine made carbon/Sic/EPDM
  • AISI304 Stainless steel suction and discharge chambers
  • AISI304 Stainless steel impellers and stages
  • Low noise bearings and AISI304 Stainless Steel motor shaft
  • Built in thermal overload protection
  • 1.5 metre power cable with a 15 Amp plug 
  •  1 Year Manufacturing Defect Warranty   View Warranty Terms here.

Control Variations Available

  • Bundled with an Italian made Watertech Press Controller for automatic on/off operation. We recommend Controllers are used in simple applications without significant ground elevations where pressure adjustment may be required. We recommend this is installed with a Belkin Surge Protector to protect the controller. You can purchase these here
  • Two Bundles available with a mechanical pressure switch and pressure tank. Choose an 8L tank to avoid pump cycling from drips and leaks.  Or choose a 24L tank for quick use such as toilet flushing, hand washing preventing pump cycling.  Mechanical Pressure Switches are useful in applications which require pressure adjustment to accommodate ground elevations or other specific site requirements. Pressure Switches must be used in conjunction with a Pressure Tank.